Rod for Carp Fishing

Exploit your rods carp successfully asks to know the 4 basics of fishing carp. These 4 principles work under your nose and you do not realize.

Yet, they directly affect the behavior and usage of your rods carp.

Check out these 4 basic principles to take advantage and fish CARP with success!

Take advantage of the action of cane

The action of cane is the 1st principle of carp fishing. This principle influence the behavior and usage of your carp rods.

Reminder of the 3 actions of cane

The action of your carp rods is defined as the way in which they bend under the effect of bending that distort them. In other words the action of Rod determines the level of flexibility of your rods.

The level of flexibility is used to classify the actions of 3 categories carp rods.

Each action of cane determines behavior and specific distortions on the body of the cannes (blank).

Let’s look at the impact of the 3 actions of cane on the behaviour, utilization, and performance to wait for your rods carp according to

How to use the action of your carp rods?

Bending is a mechanical action that causes distortions on the body of your rods carp (blank).

In situation of sin, the movement of the rods causes deformations. These distortions affect the phases of launch and the combat phase.

For the phases of launch, the degree of flexibility of the cannes translates the speed at which the canes and scions resume their initial forms. This is called stiffness in flexion.

The bending stiffness determines the level of responsiveness of your carp rods. This rigidity in bending lets you know if the rods are able to adapt their structure to deformity more or less important.

For example, an action known as cane “cutting edge” curves on the 1st third of the blank. This type of cane is rigid but it has the potential to launch at long distances.

The rigidity of the bending Rod allows him to project the line far into the water. It’s the same principle that is at work and use catapults to launch projectiles long distances.

For catapults, the lever arm is very rigid. This rigidity allows to make opposition to air more easily and throw away projectiles.

For the phases of combat, the degree of flexibility of the cannes refers to the point where the body of the cannes bends.

This flexibility allows to classify the CARP rods depending on their point of bending. Suddenly, the CARP rods can be classified into 3 types of behavior during combat with the carp.

For example, on a cane, the share of cane is advanced, the cane curve on his 1st third. The impact is direct in the fight with the carp.

Cane folds on his third 1 which allows to absorb shocks related to the tension force exerted by the carp in the end.

In addition, very fast movement of the scion to tired faster carp back on shore.

The diagram below class 3 actions of cane depending on their flexibility and their behaviors for throws and combat phases.

Note: this schema information are indicative. They can vary depending on the materials used and manufacturers.

Unleash the power of your carp rods

The power of cane is the 2nd basic principle of carp fishing. The power influence the behavior and usage of your carp rods.

The power of the canes to carp, a principle for multiple aspects

The power of a cane is defined in 2 distinct and complementary ways.

First of all, the power of carp rods can be defined as an amount of energy needed to start your lines to a certain distance. This is called power casting

The power of a cane can also be understood as its ability to withstand the CARP who tries to run away. This is called power of resistance. This power of resistance is expressed in English pound (LBS).

These 2 aspects of the power of your carp rods influence 2 important phases of your fishing sessions: the launch phase and the combat phase.

In fact, the power affects the same phases of fishing rod action.

How power affects your rods carp?

For the phases of launch, the power to launch determines the load of lead your rods can handle without breaking.

The power to launch is linked to the action of cane. More a rod is rigid, more lead can be heavy.

For example, a rod with a fast action (body of rigid rod) can support a weight more important that a cane whose action is parabolic (more flexible cane body).

Taking into account the power and action of your carp rods, you can know the performance of your rods for the phase of launch.

For the phases of combat, resistance power defines the strength of tension that a cane can undergo without breaking.

The power of resistance of a cane is closer to the action of cane. Power to the fight of your rods depends in part on their action.

In other words, the ability of your rods to support the strength of the carp in combat depends on flexibility.

For example, a rod with a tip action will be able to withstand large carp.

Conversely, a parabolic Rod will be very difficult to resist large carps. The risk of dropping out the carp is therefore greater.

Here’s how the actions of cannes and the powers of resistance of your rods used to define the type of CARP to target.

The level of flexibility and resistance of your carp rods can help you to better identify the performance you can expect.

These principles can also help to better exploit your rods at the water’s edge.

Exploit the potential of resistance of your carp rods

Resistance is the 3rd fundamental principle that influences behavior and the use of your carp rods.

The resistance of your rods in brief

The resistance of the cane is defined in 2 different but complementary ways. A bit like the principle of the power of carp rods.

First, the resistance of your rods is their ability to penetrate the air thanks to some materials used in their design.

Resilience in the face of air is useful during the launch. She mainly determines the distances to reach through your lines in the water.

The resistance of your rods, is also their ability to resist the effects of tension exerted by the carp in the end.

This definition joined the principle of the power of resistance, we talked about above. The ability to withstand the carp is very important during the combat phases.

Let’s see how these 2 aspects of resistance affects your fishing sessions.

How to take advantage of the strength of your carp rods?

For the phases of throws, the materials used to make your rods affect their ability to penetration in the air.

When you run your lines in the water, your cannes deform in curling slightly. To withstand these deformations, your carp rods must have properties that allow it to be deformed without breaking.

This deformation is possible using the materials best suited to deal with the strains generated in the air.

That’s why that carp rods are essentially made of composite materials such as carbon. Composite materials transfer their properties to your carp rods.

Based on composite material assemblies, carp rods have special properties: level of flexibility (Rod action) and lightness.

For example, a slight carp Rod opposes a low resistance to air. This type of cane allows you to throw farther.

Conversely, a heavy cane more resistance against the air. Air slows the progression of the cane in movement.

For the phases of combat, materials and their resistance are important to deal with the carp.

Composites should oppose the deformations of the body of the cannes caused by the carp.

Carbon is the most widespread composite material in the manufacture of carp rods. The special characteristics of carbon make rods both strong and light.

For example, the strength of the carbon to get a tip action or action medium unless the canes break too easily.

This level of flexibility is a key point to be taken into account to judge the strength of your carp rods.

Use the length of your carp rods

The length of your carp rods is the 4th and final principle of carp fishing. It also influences the behavior and usage of your rods.

According to belief, you must use a long Rod CARP to make a throw to long distance. No offense to some, this idea is false!

Well Yes, this isn’t the length of the rod itself which determines the distance of the throw (jet).

It’s your body that has a real influence on the distance of the throw.

As a result, the length of the rod must be adapted to your morphology.

It’s your body that determines the strength and speed at which you can start with your rod. The strength and speed will then determine the distance to reach by launching.

The length of your carp rods is a fundamental principle of the CARP fishing. It determines the ease with which you can launch your editing in the water.

Rod action, power, resistance, and the length of your carp rods are 4 principles of the CARP fishing.

Know these 4 principles will allow you to better exploit the behavior of your carp rods. You will improve the use of your rods during your sessions.

And you’ll have more fun on your outings. And that is the point!